Journal American Society of Mining and Reclamation · 1994 · 26 citations · 1 references
Natural SciencesEarth SciencesMining EngineeringHydrogeologyMine DesignMine Water ManagementMineral GeochemistryMining GeologyHydrogeologic CharacterizationHydrogeologic ModelingHydrogeological ModellingInfiltrationMineral Precipitation KineticsResidence TimeResidence Time EstimationSeepage
Mine-rock piles are complex hydrogeologic systems. As a result, the current knowledge of their physical and chemical hydrogeology is too limited to permit accurate predictions of water chemistry through time based on detailed simulations of their internal processes. However, a simplistic empirical model based on general knowledge and available data can be used to obtain rough estimates of seepage chemistry through time. This empirical model is based on five factors: (1) the production rates of metals, nonmetals, acidity, and alkalinity under acid and pHneutral conditions, (2) the volume rate of flow through the rock pile based on infiltration of precipitation, (3) the elapsed time between infiltration events, (4) the residence time of the water within the rock pile, and (5) the percentage of mine rock in the pile flushed by the flowing water. The last factor is most difficult to define at many minesites, but can be assumed due to its apparently frequent narrow range of 5 to 20%. A hypothetical example illustrates how to use the model and highlights other complications like secondary-mineral precipitation that may also have to be considered. A field example based on data from an actual minesite demonstrates the accuracy of the model as compared to measured concentrations. Again, this model ignores many complexities of mine-rock piles and is thus only useful for rough estimates of future chemistry.
1