IEEE Transactions on Instrumentation and Measurement · 2016 · 78 citations · 21 references
EngineeringMaterials EngineeringMaterials ScienceConstruction MaterialsMaterials CharacterizationMicrowave EngineeringComposite MaterialsCrack AssessmentDefect CharacterizationMaterial TestingMicrowave MeasurementsStructural Health MonitoringDefect Size EffectsFiber-reinforced Cementitious CompositesMaterial Defect DetectionSignal-to-noise RatioSignal-to-noise Ratio AnalysisThermal Imaging In InspectionThermal InspectionThermography
Nondestructive testing (NDT) of rehabilitated cement-based materials (RCMs) with carbon-fiber-reinforced polymer (CFRP) composites is quite important in the transportation and infrastructure industries. Among various NDT methods, active microwave thermography (AMT) has shown good potential. This method uses microwave energy to heat a structure of interest, and subsequently the surface thermal profile is measured using a thermal camera. In this paper, the application of AMT for defect detection (unbond, delamination, and crack) in CFRP composites used in RCMs is presented. More specifically, the effect of defect size and depth and polarization on the resultant surface thermal profile with defects is first studied through simulation. The effect of polarization on detection of defects with regard to the orientation of CFRP fibers is also experimentally investigated. Finally, a quantitative analysis of the measured results based on the thermal contrast and signal-to-noise ratio (SNR) for all the three aforementioned defect types is presented. The results show that the SNR is improved when utilizing perpendicular (compared with parallel) polarization, and that the maximum effective heating time is ~60 s, even for small defects.
21
Bharath Akuthota, Darren J. Hughes, Reza Zoughi et al. · Journal of Materials in Civil Engineering · 2004 · 93 citations