Energy & Fuels · 2016 · 30 citations · 21 references
EngineeringChemical EngineeringChemistryCombustionInorganic ChemistryReaction EngineeringCatalytic Reaction EngineeringCombustion Reaction EngineeringEnergy ConversionPacked Bed ReactorsCarbon Capture Energy PenaltyCarbon Capture MaterialsCarbon Dioxide CaptureCombustion In Fluidized Bed ReactorsCoprecipitationCoprecipitation SynthesisEnergy Conversion EfficiencyOxidation
Chemical looping combustion possesses an inherent advantage of separation of CO 2 from the carbon based fuels including thermal power plants that would offer effective mitigation of CO 2 emissions through carbon capture and sequestration. In this study, a stable and regenerative mixed transition metal oxide of Cu and Mn (CuMn 2 O 4 ) is synthesized through coprecipitation method and tested for multicycle performance for the oxidation of syngas as fuel. It was observed that 90% of the oxygen carrying capacity of CuMn 2 O 4 can be utilized for the oxidation of syngas with almost 100% conversion efficiency in a packed bed reactor. The conversion efficiency of both CO and H 2 was not altered significantly in all the tested cycles. CO 2 and H 2 O were the sole products of syngas conversion. The phase of CuMn 2 O 4 can be regenerated solely by aerial oxidation of the reduced products (Cu and MnO) at 800 °C. Utilization of maximum oxygen carrying capacity can reduce the circulation frequency of oxygen carrier between air and fuel fluidized bed reactors that can reduce the energy penalty significantly. The pelletized oxygen carrier possess appreciable mechanical strength that showed microhardness up to 2186 N/mm 2 which is suitable for fluidized bed CLC reactors.
21
Selection of Oxygen Carriers for Chemical-Looping Combustion
Juan Adánez, Luis F. de Diego, Francisco Garcı́a-Labiano et al. · Energy & Fuels · 2004 · 751 citations