AIP conference proceedings · 2016 · 39 citations · 14 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryNanomaterialsNanotechnologyCarbon NanotubesNanomaterials SynthesisNanoparticle CharacterizationNanoparticle SynthesisNanotubesSurface Functionalization Of NanomaterialsFace-centered Cubic LatticeFace-centered Cubic StructureMetal NanoparticlesNanoparticle Surface ChemistryNanoparticlesSilver Nanoparticle SynthesisSurface Functional GroupsX-ray Diffraction Analysis
In this paper, the functionalization of raw-MWCNTs involves oxidation reaction using concentrated acid mixture of HNO3:H2SO4 (1:3), via ultrasonic bath (170 W, 50 kHz) to obtain functional groups. Then Ag nanoparticles are decorated the outside over the surface of functionalized MWCNTs using a chemical reduction process resulting in the formation of(Ag/ MWCNTs) hybrid material. The results showed that outer diameter functionalized F-MWCNTs andAg nanoparticles size was about (11-80) nm and (10 to 25) nm, respectively using TEM and HRTEM. The crystallographic structure of MWCNTs using X-ray diffraction (XRD) analysis proved diffraction peaks at 38.1°, 44.3°, 64.7° and 77.4° degrees namely, Ag (111), Ag (200), Ag (220), and Ag (311) of the face-centered cubic lattice of Ag, respectively, excepting the peak at 2θ =25.6°, which correspond to the (0 0 2) reflection of the MWNTs are corresponding to Ag/MWNTs. The antimicrobial activities of Ag/MWCNTs hybrid using plate count method showed that decreasing a large number of bacteria colonies of E. coli and S. aureu with increasing the hybrid concentrations after incubation for 24h in shaker incubator with percentage of inhibition approaching 100%.
14
Evaluation of mild acid oxidation treatments for MWCNT functionalization
F. Avilés, J.V. Cauich-Rodríguez, L. Moo-Tah et al. · Carbon · 2009 · 611 citations