Model tests on resistance and seakeeping performance of wave-piercing high-speed vessel with spray rails

Jeonghwa Seo, Hak-Kyu Choi, Uh-Cheul Jeong, Dong Kun Lee, Shin Hyung Rhee, Chulmin Jung, Jaehoon Yoo

International Journal of Naval Architecture and Ocean Engineering · 2016 · 44 citations · 10 references

DOIFull text

Open access

Concepts

TL;DR

Model tests in a towing tank examined a high‑speed monohull with a slender wave‑piercing bow and spray rails that generate hydrodynamic lift to reduce trim and rise. The spray rails lowered trim by 0.97°, cut pitch and heave responses, reduced fore‑perpendicular vertical acceleration by 11.3%, and did not increase resistance, thereby stabilizing the vessel in calm water and waves.

Abstract

The resistance and seakeeping performance of a high-speed monohull vessel were investigated through a series of model tests in a towing tank. The hull had a slender wave-piercing bow, round bilge, and small deadrise angle on stern. Tests on the bare hull in calm water were first conducted and tests on spray rails followed. The spray rails were designed to control the flow direction and induce a hydrodynamic lift force on the hull bottom to reduce trim angle and increase rise of the hull. The maximum trim of the bare hull was 4.65° at the designed speed, but the spray rails at optimum location reduced trim by 0.97°. The ship motion in head seas was examined after the calm water tests. Attaching the rails on the optimum location effectively reduced the pitch and heave motion responses. The vertical acceleration at the fore perpendicular reduced by 11.3%. The effective power in full scale was extrapolated from the model test results and it was revealed that the spray rails did not have any negative effects on the resistance performance of the hull, while they effectively stabilized the vessel in calm water and waves.

References

10