The classification of metal weld deposits in terms of the amount of oxygen

Abstract

In analogy to the classification of metal weld deposits and arc welding processes of low-carbon and low-alloy steel in terms of the amount of hydrogen in metal weld deposits, a similar classification was given in terms of the amount of oxygen. Different methods of arc welding processes were chosen, such as welding with coated electrodes (basic, rutile, acid, oxide electrodes), shielded arc welding process MIG/MAG, submerged arc welding process (various wires, fluxes, shielded gases). The amount of oxygen and the percentage of acicular ferrite of metal weld deposits were mainly analysed and the impact toughness of it. Metallographical structures and fractography tests of metal weld deposit with varied amount of acicular ferrite were presented by putting attention to non-metallic inclusions and their morphology presented in metal weld deposit. Additional inclusions observation and measurements were done using a scanning electron microscope equipped with an energy-dispersive X-ray spectrometer. The studies were also made on the classification of metal weld deposits and arc welding processes of low carbon and low alloy steel in terms of the amount of oxygen in metal weld deposits on the following processes: low-oxygen processes, medium-oxygen processes, high-oxygen processes.