Effect of Gap Flow on the Torque for Blades in a Rim Driven Thruster without Axial Pressure Gradient

Qingtai Cao, Wanli Zhao, Denghai Tang, Fan Hong

Procedia Engineering · 2015 · 18 citations · 4 references

DOIFull text

Open access

Concepts

Abstract

This paper applied RANS solver and angular momentum current analyzing method to study the effect of gap flow in a rim driven thruster on the torque of the blades when the propeller was replaced by a rotating disk. The rim's torque was divided into two parts, outer surface and end faces. The torque of outer surface was resulted by turbulent Taylor vortex flow in the radial gap between inner and outer cylinder. The torque of end faces was resulted by radial outflow and inflow in the axial gap. Based on N-S equations angular momentum current was conserved in radial gap by neglecting of influence of end faces. We employed RANS solver to investigate the effect of the ratio between inner and outer cylinder radius on the torque of the outer surface by keeping the axial gap ratio. As such the effect of axial gap ratio on the torque of end faces was explored by holding radial gap ratio. Whereafter angular momentum current conservation was applied to obtain a predicted formula to calculate the torque of the outer surface. A new predicted method of calculating the torque of end faces was obtained by fitting the CFD calculated results. Finally the developed method was validated by experiments in the large cavitation tunnel of CSSRC. It showed that the torque calculated by the new predicted method agreed well with experiments comparing with the empirical formulas from Bilgen and Boulos, Daily and Nece.

References

4