Current-Sensorless Power-Decoupling Phase-Shift Dual-Half-Bridge Converter for DC–AC Power Conversion Systems Without Electrolytic Capacitor

Abstract

In this paper, a novel DHB power-decoupling control scheme without current sensor is proposed for single-phase inverters. As electrolyte capacitors are conventionally used; however, these capacitors limit ripple current capability and circuit reliability. Film capacitors improve the ripple current capability, size reduction, and circuit reliability. Conventionally, non-isolated topologies are used for power decoupling. The volume of the decoupling capacitor per unit energy in isolated bidirectional power decoupling topologies is reduced as compared to nonisolated due to unrestricted voltage across the decoupling capacitor. Voltage-fed Phase-Shift Dual Half-Bridge (DHB) is preferred with film capacitors as it has the least number of components in isolated bidirectional topologies. However, in DHB, power decoupling controller is a challenge as current control is conventionally required. The challenge has been overcome with novel current-sensorless dc link ripple rejection control. The controller has the advantage of current-sensorless configuration especially when it needs information from inverter phase-lock-loop (PLL). The proposed power decoupling control scheme is independent of the inverter control and universal. A new dynamic analysis has been carried out by taking into account the input-voltage dynamics. The advantage of the DHB is that it has single pole behavior and, hence, sufficient bandwidth can be obtained. Simulations and experiments have been performed to verify the analysis of the power decoupling control scheme and the capability of film-capacitor DHB for power decoupling.