Energy & Fuels · 2016 · 34 citations · 12 references
EngineeringChemical EngineeringMaterials EngineeringReaction EngineeringThermal AnalysisWater TreatmentHydrocarbon GenerationSteam FloodingSteam InjectionThermal Enhanced Oil RecoveryThermal Recovery ProcessesWater ChemistryBitumenBitumen CharacterizationBitumen CompositionExperimental Study DesignKinetic MeasurementPhase CompositionTemperature EffectsThermal Recovery
Laboratory studies and pilot project tests have shown that appreciable amounts of H 2 S and CO 2 could be generated as a result of the aquathermolysis reaction between bitumen and steam or hot water during thermal recovery operations. A detailed experimental study was carried out to investigate the H 2 S generation mechanism that occurs during the recovery processes. A laboratory setup was designed and assembled that allowed for aquathermolysis tests to be carried out under controlled pressure conditions and at temperatures to 250 °C. Aquathermolysis tests on a defined ratio of bitumen and water sample were carried out at 225 and 245 °C over 3, 10, and 30 day reaction periods. Phase sampling and analysis procedures were developed to quantify the amount of H 2 S and CO 2 generated during the individual vapor and aqueous phases. Vapor- and liquid-phase composition and bitumen properties, including viscosity and density, were analyzed after each reaction. The results of the investigation showed that the amount of H 2 S and CO 2 generated increased with the reaction time and temperature and the CO 2 concentration tended to flatten out over the test period. Data generated during the study were used to develop a kinetic model on a laboratory scale for predicting the time and temperature effects on H 2 S and CO 2 production during the bitumen–steam/hot water aquathermolysis.
12
Punitkumar R. Kapadia, Jingyi Wang, Michael S. Kallos et al. · Journal of Petroleum Science and Engineering · 2012 · 58 citations
Engineering, Chemical Engineering, Petroleum Engineering +15