International Journal of Electrochemical Science · 2016 · 14 citations · 34 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallic MaterialsMetallurgyThin FilmsAlloysCoating ProcessesCoatingsMetalsPhysical Vapor DepositionThin Film AnnealingAluminium AlloysAluminum AlloysAnnealing Temperature EffectsMagnesium AlloysPhysical Vapor Deposition CoatingsPhysical Vapor Deposition MaterialsSurface Pretreatment
Magnesium alloys have been widely used in many fields owing to its light weight. However, their poor corrosion resistance has prevented their further applications. In this study, vacuum evaporation deposition coupled with the pretreatment of the AZ91D magnesium alloy substrates were employed to successfully prepare an aluminum coating on AZ91D magnesium alloy in an attempt to enhance its corrosion resistance. The surface morphology, corrosion resistance and adhesive strength of the coatings prepared from different pretreatments were systemically investigated. The effect of deposition time and annealing treatment on the surface morphology, corrosion resistance and adhesive strength was also examined. The results showed that the best corrosion resistance and highest adhesive strength of the aluminum coating were obtained for the specimen pretreated by H 3 PO 4 etching. As the deposition time increases, a continuous and dense aluminum coating gradually forms on the surface of magnesium alloy following the typical island growth (Volmer-Weber) mode. The increase of deposition time enhances the corrosion resistance of magnesium alloy but has no effect on the adhesive strength between the coating and the substrate. With the increase of the annealing temperature, the coating of the sample becomes more uniform with better crystallinity of aluminum compared with unannealed sample.
34
Physical Origins of Intrinsic Stresses in Volmer–Weber Thin Films
Jerrold A. Floro, Eric Chason, R. C. Cammarata et al. · MRS Bulletin · 2002 · 307 citations