Life SciencesDermatologyAllergyBiomedical ImagingDiagnostic ImagingAtopic DermatitisColor ImagingPatch TestingSkin AssessmentSkin ExaminationDermal Irritation AssessmentDiagnostic PhototestingNickel Allergic Contact DermatitisNickel Allergy TestingPatch Test InterpretationPatch Test ReadingsPicture ElementSkin Sensitivity Reactions
In order to characterize and quantify irritant skin reactions, 12 women aged 18 to 45 underwent 5 patch tests with sodium lauryl sulfate at the following concentrations: 0.5, 1, 2, 3 and 5%. The tests, applied on volar forearm skin, were removed after a 24-h application. Evaporimetry and B scanning were carried out at the beginning and at 24, 48 and 72 h after patch test application. Echographic recordings were performed by Dermascan C (Cortex Technology, Hadsund, Denmark). After the acquisition, the echographic images were processed by a dedicated software (Dermavision 2D, Cortex Technology, Hadsund, Denmark) enabling the selection of amplitudes of interest and the transformation into a binary colour system. By attributing one colour to a selected amplitude band, part of an image can be highlighted and assessed by a value corresponding to the number of pixels (picture elements). For the evaluation of the images, 2 bands were chosen. The first, ranging from 201 to 255 is able to highlight hyperreflecting parts of the pictures (epidermis, lower part of the dermis); the second, ranging from 0 to 30, marks the hypo-echogenic part of the tissue, which is the site of inflammation. The evaluation by means of the 201-255 amplitude band showed a marked decrease of the echogenicity of the epidermis which was more pronounced at 24-h determinations and for higher concentrations of sodium lauryl sulphate (SLS), whereas the increase in pixel numbers, shown by the 0-30 band, was slight and apparent only for high SLS concentrations. Echographic data and transepidermal water loss (TEWL) values showed a good correlation.(ABSTRACT TRUNCATED AT 250 WORDS)