Advanced Engineering Materials · 2016 · 25 citations · 27 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsSurface EngineeringJoint StrengthSteel MaterialsStructural JointsSurface Preparation For JoiningWelding ProcessesBond StrengthHeat Treatment EffectsJoint Strength AnalysisMicroscopic Material AnalysisPlastic Deformation BehaviorRollingSurface Chemical State AnalysisWelded Joints
The influence of a chemical or mechanical surface modification followed by different post‐heat treatments on the bond strength of galvanized steel/aluminum composites is studied. An incremental rolling process is used for joint formation based on plastic deformation. The morphology, the chemical state of the modified surfaces as well as the cross‐section, and local potential distribution of the welded zone is characterized by different microscopic and spectroscopic methods. The stability of the joint is analyzed by a shear‐force test in combination with microscopic failure analysis. A clear correlation between pre/post‐treatment and the joint strength is observed.
27
The metallurgy of zinc-coated steel
A. R. Marder · Progress in Materials Science · 2000 · 1.5K citations
Natural Sciences, Materials Engineering, Materials Science +12
Joining by plastic deformation
K. Mori, Niels Bay, Livan Fratini et al. · CIRP Annals · 2013 · 453 citations
Natural Sciences, Materials Engineering, Materials Science +11
Corrosion mechanism of model zinc–magnesium alloys in atmospheric conditions
Tomáš Prošek, A. Nazarov, Ulf Bexell et al. · Corrosion Science · 2008 · 319 citations
Natural Sciences, Materials Engineering, Materials Science +16