Response surface methodology (RSM) and its application for optimization of ammonium ions removal from aqueous solutions by pumice as a natural and low cost adsorbent

Abstract

Abstract This research was conducted to study the adsorption of ammonium ions onto pumice as a natural and low-cost adsorbent. The physico-chemical properties of the pumice granular were characterized by X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Modeling and optimization of a NH 4 + sorption process was accomplished by varying four independent parameters (pumice dosage, initial ammonium ion concentration, mixing rate and contact time) using a central composite design (CCD) under response surface methodology (RSM). The optimum conditions for maximum removal of NH 4 + (70.3%) were found to be 100 g, 20 mg/l, 300 rpm and 180 min, for pumice dosage, initial NH 4 + ion concentration, mixing rate and contact time. It was found that the NH 4 + adsorption on the pumice granular was dependent on adsorbent dosage and initial ammonium ion concentration. NH 4 + was increased due to decrease the initial concentration of NH 4 and increase the contact time, mixing rate and amount of adsorbent.