Scientific Reports · 2015 · 67 citations · 38 references
EngineeringMaterials EngineeringMaterials ScienceElectrochemical EngineeringEnergy MaterialsMembrane ScienceElectrochemical CellsElectrode MaterialsFuel CellsMembrane EngineeringMembrane FabricationMembrane MaterialsAir Humidity EffectsMembrane Electrode AssembliesMembrane ElectrodesMembrane Fabrication TechniquesMembrane PerformancePolymer Electrolyte MembranesPower DensitySurface Area
Polymer electrolyte membrane fuel cell is a promising zero-emission power generator for stationary/automotive applications. However, key issues, such as performance and costs, are still remained for an economical commercialization. Here, we fabricated a high-performance membrane electrode assembly (MEA) using an interfacial design based on well-arrayed micro-patterned membranes including circles, squares and hexagons with different sizes, which are produced by a facile elastomeric mold method. The best MEA performance is achieved using patterned Nafion membrane with a circle 2 μm in size, which exhibited a very high power density of 1906 mW/cm(2) at 75 °C and Pt loading of 0.4 mg/cm(2) with 73% improvement compared to the commercial membrane. The improved performance are attributed to the decreased MEA resistances and increased surface area for higher Pt utilization of over 80%. From these enhanced properties, it is possible to operate at lower Pt loading of 0.2 mg/cm(2) with an outstanding performance of 1555 mW/cm(2) and even at air/low humidity operations.
38
Electrocatalyst approaches and challenges for automotive fuel cells
Mark K. Debe · Nature · 2012 · 5.8K citations