Journal of Composite Materials · 2015 · 12 citations · 26 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetallic MaterialsAlloysComposite MaterialsMetal MaterialsMetal Matrix CompositesMetalsStrength Of MaterialsAluminum AlloysAluminum Matrix CompositesAluminum-containing AlloysField EmissionMechanical AlloyingMelt BehaviorMetal Matrix NanocompositesTensile Strength
In the present investigation, a comparative study using X-ray mapping analysis and Field emission gun scanning electron micrographs is performed to understand the distribution and the mechanical properties of aluminum nano metal matrix composites. Parameters considered for comparison have two different forms for adding nanoreinforcement into metal melt. One form is produced by the addition of mechanically alloyed powders with an increasing launching vehicle weight percentage (L-1, L-3 and L-5), and the other form is produced by pellets of mechanically alloyed powders (PL-1). Micrographs reveal uniform distribution of nanoreinforcements, while X-ray mapping observations show Iron (Fe) contamination due to the addition of pellets in some areas unlike the mechanically alloyed powders. L-5 is observed to attain the highest tensile strength of 202 MPa for the Al-Cu/1.5 wt. % Al 2 O 3 composite. The results illustrate an increase in composites strength with increase in launching vehicle content but on the expense of nanoreinforcement particle rejection from the melt.
26
Erik T. Thostenson, Chunyu Li, T CHOU · Composites Science and Technology · 2004 · 1.7K citations
Aluminium matrix composites: Challenges and opportunities
M.K. Surappa · Sadhana · 2003 · 1.2K citations
Natural Sciences, Materials Engineering, Materials Science +12