Concepedia

Cu-Mg-Al hydrotalcite-like materials as precursors of effective catalysts for selective oxidation of ammonia to dinitrogen — The influence of Mg/Al ratio and calcination temperature

Sylwia Basąg, Zofia Piwowarska, Andrzej Kowalczyk, Agnieszka Węgrzyn, Rafał Baran, Barbara Gil, Marek Michalík, Lucjan Chmielarz

Applied Clay Science · 2016 · 62 citations · 31 references

Open access

References

31

Hydrotalcite-type anionic clays: Preparation, properties and applications.

Fabrizio Cavani, F. Trifiro′, Angelo Vaccari · Catalysis Today · 1991 · 5.9K citations

Natural Sciences, Materials Engineering, Materials Science +10

Ammonia emissions from non-agricultural sources in the UK

M. A. Sutton, U. Dragosits, Y. Sim Tang et al. · Atmospheric Environment · 2000 · 352 citations

Natural Sciences, Environmental Management, Environmental Sciences +11

Surface and bulk properties of Cu–ZSM-5 and Cu/Al2O3 solids during redox treatments. Correlation with the selective reduction of nitric oxide by hydrocarbons

H. Praliaud · Applied Catalysis B: Environmental · 1998 · 342 citations

Natural Sciences, Chemistry, Materials Science +14

An FT-IR study of ammonia adsorption and oxidation over anatase-supported metal oxides

J. M. Gallardo‐Amores, Vicente Sánchez Escribano, Gianguido Ramis et al. · Applied Catalysis B: Environmental · 1997 · 340 citations

Natural Sciences, Chemistry, Materials Science +12

Copper based catalysts for the selective ammonia oxidation into nitrogen and water vapour—Recent trends and open challenges

Magdalena Jabłońska, Regina Palkovits · Applied Catalysis B: Environmental · 2015 · 267 citations

Natural Sciences, Chemical Engineering, Chemistry +15