A Modified P&O Maximum Power Point Tracking Method With Reduced Steady-State Oscillation and Improved Tracking Efficiency

Jubaer Ahmed, Zainal Salam

IEEE Transactions on Sustainable Energy · 2016 · 376 citations · 33 references

Concepts

Abstract

This paper proposes a method to reduce the steadystate oscillation and to mitigate the probability of losing the tracking direction of the perturb and observed (P&O)-based maximum power point tracking (MPPT) for PV system. The modified scheme retains the conventional P&O structure, but with a unique technique to dynamically alter the perturbation size. At the same time, a dynamic boundary condition is introduced to ensure that the algorithm will not diverge from its tracking locus. The modified P&O is simulated in MATLAB Simulink and its performance is benchmarked using the standard MPPT efficiency ηM P P T calculation. Furthermore, the proposed concept is validated experimentally using a buck-boost converter, fed by a solar PV array simulator (PVAS). Based on the EN 50530 dynamic irradiance tests, the proposed method achieved an average ηMP P T almost 1.1% higher than the conventional P&O when irradiance changes slowly and about 12% higher under fast change of irradiance.

References

33