IEEE Transactions on Power Electronics · 2015 · 51 citations · 31 references
EngineeringElectrical EngineeringCircuit TheoryLow-power DesignPower ElectronicsAc-dc ConvertersConverter TopologiesCurrent DriveDc-ac InvertersResonant ConvertersSoft-switching TechniquesAuxiliary Resonant CommutationCommutation ProcessEquivalent CircuitsParameter DesignResonant InvertersSoft SwitchingSoft-switching ConvertersSoft-switching Inverters
Aimed at the problem that the auxiliary commutation circuit (ACC) of auxiliary resonant commutated pole (ARCP) inverters has a high loss in commutation processes, this paper presents a novel modulation strategy with shunt dead time based on a double ARCP (DARCP) inverter. In comparison with the original modulation strategy, this modulation strategy cannot only achieve soft switching for all switches, but also avoid the superposition of resonance current and load current at commutation moments in double ACCs (DACCs) and make the maximum current through DACCs approximately equal to load current in commutation processes. So, the circulating current loss in DACCs and the current stress of auxiliary switches can be effectively reduced. According to the equivalent circuits in different operation modes under the novel modulation strategy, this paper analyzes the operation principle, soft-switching implementation condition, and optimal parameter design procedure of the DARCP inverter. Finally, a 10-kW–16-kHz DARCP inverter prototype with insulated gate bipolar transistor-based switches is built. Experimental results are given to demonstrate the validity and features of the DARCP inverter under the novel modulation strategy.
31
The auxiliary resonant commutated pole converter
Rik W. De Doncker, J.P. Lyons · 2002 · 662 citations
The auxiliary quasi-resonant DC link inverter
Rik W. De Doncker, J.P. Lyons · 2002 · 138 citations
A delta configured auxiliary resonant snubber inverter
Jih‐Sheng Lai, R. W. Young, G.W. Ott et al. · 2002 · 128 citations · Full text
Engineering, Electrical Engineering, Marine Electrical Systems +14