Perspectives in Science · 2016 · 15 citations · 3 references
EngineeringMechanical EngineeringEnergy SystemsHeat TransferThermal AnalysisCycle OptimizationEnergy ConversionEnergy EfficiencyPower CyclesThermal DesignCycle SimulationPower Cycle OptimizationPower Plant OptimizationSpecific Energy ConsumptionThermal CyclesThermal EfficiencyThermal Efficiency AnalysisThermal Efficiency Optimization
The objective of the paper is to analyse parametric studies and optimum steam extraction pressures of three different (subcritical, supercritical and ultra-supercritical) coal fired power plant cycles at a particular main steam temperature of 600 °C by keeping the reheat temperature at 537 °C and condenser pressure at 0.09 bar as constant. In order to maximize the heat rate gain possible with supercritical and ultra-supercritical steam conditions, eight stages of feed water heater arrangement with single reheater is considered. The system is optimized in such a way that the percentage exergetic losses are reduced for the increase of the exergetic efficiency and higher fuel utilization. The plant cycles are simulated and optimized by using Cycle Tempo 5.0 simulation software tool. From the simulation study, it is observed that the thermal efficiency of the three different power plant cycles obtained as 41.40, 42.48 and 43.03%, respectively. The specific coal consumption for three different power plant cycles are 0.56, 0.55 and 0.54 Tonnes/MWh. The improvement in feed water temperatures at the inlet of steam generator of respective cycles are 291, 305 and 316 °C.
3
Advanced Thermodynamic Analysis and Evaluation of a Supercritical Power Plant
Ligang Wang, Yongping Yang, Tatiana Morosuk et al. · Energies · 2012 · 106 citations · Full text
Engineering, Mechanical Engineering, Systems Engineering +15