Optimization of the Bias Magnetic Field of Shear Wave EMATs

Abstract

The main advantage of electromagnetic acoustic transducers (EMATs) over piezoelectric transducers is that no direct contact with the specimen under test is required. Therefore, EMATs can be used to test through coating layers. However, they produce weaker signals, and hence, their design has to be optimized. This paper focuses on the design of a Lorentz force shear wave EMAT and its application in thickness gaging; special emphasis is placed on the optimization of the design elements that correspond to the bias magnetic field of the EMAT. A configuration that consists of several magnets axisymmetrically arranged around a ferromagnetic core with like poles facing the core was found to give the best results. By using this configuration, magnetic flux densities in excess of 3 T were obtained in the surface of a specimen; the maximum value achieved by a single magnet under similar conditions is roughly 1.2 T. If the diameter of an EMAT ultrasonic aperture is 10 mm, the proposed configuration produces signals roughly 20 dB greater than a single magnet, while for a given overall EMAT volume, signals were greater than 3-6 dB. Linear and radial shear wave polarizations were also compared; a higher mode purity and signal intensity were obtained with the linear polarization.