EPJ Web of Conferences · 2016 · 11 citations · 0 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallurgyNuclear MaterialsCladding MaterialsMixed Oxide FuelNuclear Fuel MaterialsRadiation Damage In MaterialsRadiation HardeningRadiation-resistant MaterialsAustenitic Stainless SteelsAustenitic SteelsCreep-resistant AlloysDeformationIrradiation CreepPost-irradiation ExaminationRadiation-resistant AlloysSwelling Resistance
An important class of swelling-resistant alloys used in fast-reactor are the cold-worked, titaniumstabilized austenitic stainless steels (15-15Ti AIM1 in France, DIN1.4970 in Germany, optimized D9 in the US and AFIC1 in India). An advanced 15-15Ti alloy was selected for the fuel cladding of the initial core of the fast-reactor French project ASTRID [1]. To extend its qualification at high dose, post-irradiation examinations were recently performed on mixed-oxide fuel pins, irradiated in the Phnix fast-reactor up to 130 dpa and retrieved after Phnix shutdown. As shown in Fig. The results are compared with the past examinations on the same material at lower dose 80 and 110 dpa [2] and confirm the very good swelling resistance of this optimized alloy at 130 dpa.