Effect of temperature on the joint strength of a silyl-modified polymer-based adhesive

Jingxin Na, Yu Liu, Yisa Fan, Wenlong Mu, Xin Chen, Yakun Yan

The Journal of Adhesion · 2016 · 15 citations · 9 references

Concepts

Abstract

ABSTRACTTemperature is a very important factor that must be fully considered in the study on the adhesive joint strength. In this paper, a silyl-modified polymer-based adhesive ISR 70-08 which is widely used in engineering was studied. Dog-bone specimens were fabricated and tested at −40°C, room temperature (RT), and 90°C. Results show a decrease in the main mechanical properties with increasing temperature. Butt joints (BJs), single-lap joints (SLJs), and Scarf joints (SJs) were fabricated and tested at different temperatures. A quadratic polynomial expression was an ideal choice to express the joint strength as a function of temperature which was obtained using the least-squares method. Temperature combinations of −40°C, 0°C, and 90°C were obtained to study the effect of temperature on the joint strength more easily for this adhesive. A three-dimensional surface, consisting of temperature, adhesive angle, and joint strength was presented to facilitate the application of bonding structures in engineeringKEYWORDS: Aluminium and alloysbutt jointslap-shearmechanical properties of adhesivespolyurethane FundingThis research was supported by National Natural Science Foundation of China [grant number 51075187].Additional informationFundingThis research was supported by National Natural Science Foundation of China [grant number 51075187].

References

9