Industrial & Engineering Chemistry Research · 2011 · 22 citations · 54 references
EngineeringChemical EngineeringProcess Systems EngineeringReaction EngineeringTransport PhenomenaAzeotropic SeparationBatch Process ControlDistillationProcess IntensificationProcess OptimizationProcess SynthesisAzeotropic DistillationBatch DistillationGenetic Algorithm Based DesignGenetic Algorithm OptimizationGenetic Algorithm Variable SelectionProcess Parameters OptimizationProfit Function AnalysisRecovery Yield
Heterogeneous extractive batch distillation of the chloroform−methanol minimum-boiling-temperature azeotropic mixture is studied with water as a heterogeneous entrainer. The continuous feeding of water allows recovery of 99 mol % chloroform after condensation of the saddle binary heteroazeotrope water−chloroform. Unlike a homogeneous process, the reflux composition is different from the heteroazeotrope water−chloroform in the vapor overhead. Besides, the distillate recovery is improved by refluxing a portion α of the chloroform-rich distillate phase along with the water-rich entrainer phase. A genetic algorithm is coupled to a constant molar overflow model to study seven operation policies. Optimization parameters are the entrainer flow rate F E / V, the portion α T3 of the distillate-rich phase refluxed to the column during chloroform distillation, and the reflux policy R T5 during methanol distillation. The optimization maximizes a profit function, penalized with recovery yield constraints, whereas purity targets are used as task ending events. All optimized solutions achieve higher than 90 mol % recovery yields and 99 mol % purity for both products chloroform and methanol. The results are confirmed by rigorous simulation showing the good performance of coupling a simplified model and a genetic algorithm as a first approach. The two-piece-wise parameter value operation policies for all three parameters increase profit by 41.8% and reduce total time by 43.8% compared to the single value parameter policy. The parameter influence study ranks R T5 first, α T3 second, and F E / V last. Keeping F E / V constant and using the two-piece-wise α T3 and R T5 value operation is recommended to increase profit.
54
Feasibility of extractive distillation in a batch rectifier
Z. Lelkes, Péter Láng, Belkacem Benadda et al. · AIChE Journal · 1998 · 117 citations