Dynamic Characteristics of Shape Memory Alloy Metal Mesh Dampers

Bugra Ertas, Huageng Luo, Darren Hallman

50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference · 2009 · 23 citations · 10 references

Concepts

Abstract

The study presented in this paper involved characterizing the amplitude and frequency dependent stiffness and damping coefficients for oil-free metal mesh dampers weaved from several different types of materials. The material test matrix consisted of stainless steel 304, Inconel 600, copper, and nickel-titanium (NiTi) shape memory alloy. The research specifically focuses on NiTi alloy damper and how the stiffness and damping performance compares with the other metal mesh damper materials. Steady state forced vibration and transient vibration tests were used to characterize the stiffness and damping as functions of frequency and vibration amplitude. The results show that vibration amplitude has the opposite influence on the NiTi material damping when compared to the other materials, whereas the influence of vibration amplitude on NiTi stiffness was the same as the other materials. While the conventional metal samples give decreasing damping as vibration amplitude increases, the NiTi samples generated increasing damping as vibration levels increased. In addition to comparisons of stiffness and damping between different materials with the same mesh density, a lower mesh density for NiTi was tested and compared to the higher mesh density damper. Nomenclature A = acceleration c = modal damping k = modal stiffness m = modal mass f(t) = sinusoidal forcing function x(t) = harmonic response H(ω) = frequency domain transfer function ω = excitation frequency X = peak vibration amplitude F = peak force amplitude I.

References

10