ACS Applied Materials & Interfaces · 2014 · 75 citations · 39 references
Natural SciencesMaterials EngineeringMaterials ScienceCatalysisElectrochemical EngineeringEnergy MaterialsCatalytic MaterialsFuel Cell MaterialsFuel CellsIron OxidesMetal Oxide NanomaterialsNanocompositesCarbon CompositesCatalyst Active SitesElectrical Conductivity EnhancementFace-centered Cubic StructureFuel Cell CatalystsMetal Oxide CatalystsMicrobial Fuel CellsPower Density
Waste cornstalks and pomelo skins are used as carbon resources for preparing nanocomposites of iron oxide and partly graphitized carbon (Fe3O4/PGC-CS and Fe3O4/PGC-PS). The results showed that Fe3O4 with a face-centered cubic structure is uniformly dispersed on the skeleton of Fe3O4/GC, and the highest SBET values of Fe3O4/PGC-CS (476.5 m(2) g(-1)) and Fe3O4/PGC-PS (547.7 m(2) g(-1)) are obtained at 1000 °C. The electrical conductivity and density of catalytic active sites are correspondingly improved by the introduction of Fe species. Microbial fuel cells (MFCs) with a mixed composite (Fe3O4/PGC-CS:Fe3O4/PGC-PS = 1:1) cathode (three-dimensional structures) generate the highest power density of 1502 ± 30 mW m(-2), which is 26.01% higher than that of Pt/C (1192 ± 33 mW m(-2)) and only declines by 7.12% after 18 cycles. The Fe3O4/PGC-CS cathode has the highest Coulombic efficiency (24.3 ± 0.7%). The Fe3O4/PGC composites exhibit high oxygen reduction reactivity, low charge transfer resistances, and long-term stability and can be used as a low-cost and high-efficiency catalyst for MFCs.
39
Zhong‐Shuai Wu, Shubin Yang, Yi Sun et al. · Journal of the American Chemical Society · 2012 · 2.1K citations
Natural Sciences, Materials Engineering, Materials Science +17