2012 · 12 citations · 7 references
Natural SciencesEarth SciencesGeophysicsAcousticsExploration GeophysicsSeismologyAcoustic Remote SensingGeophysical Signal ProcessingHydrophone ArraysSeismic Data AcquisitionSeismic InstrumentationSeismic Monitoring4D Seismic MonitoringHydrophonesIndustrial NoiseRepeatabilitySignal Variation
In order to improve the seismic repeatability required for weak 4D signal measurement, we bury the sensors and the sources below the weathering layer. Nevertheless a part of the emitted signal is transmitted to the weathering layer. After a reflection or a conversion in the vicinity of the earth surface, the downgoing waves are recorded by the buried sensors and may affect the repeatability of the primary 4D signal. The reduction of these unwanted waves is necessary to ensure a good reliability of the seismic monitoring results. In an industrial noise context (which is usually the case for reservoir production), it has been observed that geophones are much noisier than hydrophones (Forgues and Schisselé, 2010). In these circumstances, we show that the use of dual-depth hydrophones as an alternative to P-Z summation allows us to handle the receiver ghost and significantly improve the signal repeatability and stabilize the signal variation above the reservoir.
7
Seismic repeatability, normalized rms, and predictability
Ed Kragh, P. A. F. Christie · The Leading Edge · 2002 · 391 citations
Parametric wavefield decomposition and applications
W. Scott Leaney, E. P. Schlumberger · 1990 · 58 citations