Journal of MMIJ · 2009 · 13 citations · 4 references
EngineeringEarth SciencesGeologyPetrologyRock MechanicsSedimentologyPoromechanics Of RocksRock PhysicsRock PropertiesSedimentary RocksStress In RocksThermal Effects In RockPore StructurePorosityPorosity From Core AnalysisRock CompressibilityRock Mechanics Of Boreholes
As part of the research and development program on geological disposal of high-level radioactive waste Japan Atomic Energy Agency is implementing the Horonobe URL Project. This paper shows the results obtained from the laboratory tests carried out to understand mechanical properties of Horonobe siliceous rocks for site characterization. Accordingly, the relationship among microscopic observation, sedimentary history and mechanical properties of Horonobe siliceous rocks was discussed in this paper. Such laboratory tests as uniaxial compression test, triaxial compression test, isotropic consolidation test were carried out. Uniaxial compression tests were carried out for specimen sampled at about 50 m interval of eleven deep boreholes more than 500 m deep from the ground surface. Triaxial compression tests including isotropic consolidation test were also carried out using cores of the boreholes. The triaxial tests were carried out under drained and undrained conditions since change in pore structure was expected for the sedimentary soft rocks with large effective porosity. Physical and mechanical properties showed significant variations along the burying depth due to dissolution of the minute porosity in diatom occured from increasing of overburden, temperature etc. The consolidated undrained and drained triaxial compression tests showed different behaviors of strain-softening, pore pressure and dilatancy between diatomaceous and siliceous mudstones. Stress-strain behavior changed from strain-softening to ductile behavior under high confining pressure and pore pressure increased gradually even after peak strength for diatomaceous mudstone. On the other hand, for siliceous mudstone strain-softening behavior was observed and pore pressure decreased rapidly after peak stress regardless of confining pressure value. Diatomaceous mudstone yielded under hydrostatic pressure of 10 MPa in isotropic consolidation test. This yielding was regarded as pore collapse based on the variation of hydraulic conductivity which was estimated from variation of volumetric strain in isotropic consolidation test, effective porosity and microscopic observation before and after the yielding.
4