The Journal of Physical Chemistry C · 2011 · 98 citations · 47 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemistrySurface ChemistrySurface ScienceBattery MaterialsElectrochemical Energy StorageElectrode MaterialsElectrode-electrolyte InterfacesElectrolyte SolutionsSurface PhysicsAtomic Force Microscopy AnalysisElectrochemical CharacterizationFilm FormationLithium-ion BatteriesLithium-ion Battery MaterialsMicroscopic CharacterizationPyrolytic GraphiteSurface Film Formation
Changes in the surface morphology of the edge planes of graphite during a potential sweep were studied using highly oriented pyrolytic graphite (HOPG) in an ethylene carbonate (EC) + diethyl carbonate (DEC)-based electrolyte solution by in situ atomic force microscopy (AFM). The effects of the microscopic structures of graphite, i.e., edge and basal planes, on surface film formation are discussed. The formation of fine particles and precipitates was observed depending on the electrode potential between 1.0 and 0 V. These were considered to be remnants of blisters that could be observed at the basal plane and decomposition products of the electrolyte solution. The surface films were 56 and 66 nm thick after the first and second cycles, respectively. The precipitate layer formed on the edge plane was thinner than that observed on the basal plane after the second cycle. These results enabled us to elucidate the difference in the formation of surface films on the edge and basal planes of HOPG.
47
Insertion Electrode Materials for Rechargeable Lithium Batteries
Martin Winter, Jürgen Besenhard, Michael E. Spahr et al. · Advanced Materials · 1998 · 2.9K citations
Natural Sciences, Materials Engineering, Materials Science +17
Doron Aurbach, Boris Markovsky, Assaf Shechter et al. · Journal of The Electrochemical Society · 1996 · 747 citations
Natural Sciences, Chemical Engineering, Materials Science +17