Effects of Thermal Treatments on the Microstructure and the Conductivity of Superion-Conducting Glass-Ceramics in the System Na<sub>2</sub>O-R<sub>2</sub>O<sub>3</sub>-P<sub>2</sub>O<sub>5</sub>

Takeshi Nojiri, Kimihiro Yamashita, Takafumi Kanazawa

Journal of the Ceramic Society of Japan · 1989 · 16 citations · 0 references

DOIFull text

Open access

Concepts

Abstract

In the system Na2O-R2O3-P2O5-SiO2 (R=Y, Sm, Gd), new fast Na+-conducting glass-ceramics were obtained. These materials were structurally analogous to the silicates of Na3YSi3O9 (N3YS), Na5YSi4O12 (N5YS) and Na9YSi6O18 (N9YS). The ionic conductivities of these materials were strongly dependent on the type of crystal phase. Among them N5YPS-type glass-ceramic showed the highest ionic conductivity, σ300=9.8×10-2S/cm. The complex admittance analysis indicated that the N5YPS-type glass-ceramics consisted of two phases, crystallized grains and residual glassy matrix. Both time and temperature for crystallization had considerable influences on the conduction properties, thus, annealing at a higher temperature for longer time gave higher ionic conductivity of crystallized grains and higher activation energy of residual glass. Microstructure was considered to understand the thermal effects. The optimum conditions for crystallization were discussed with reference to the conduction properties.