31st Joint Propulsion Conference and Exhibit · 1995 · 39 citations · 12 references
EngineeringAerospace EngineeringMechanical EngineeringComputational Fluid DynamicsFluid DynamicsHeat TransferHeat FlowHeat Transfer AnalysisHeat Transfer ModelingThermal SimulationTransonic AerodynamicsTurbulent TransportCfd SimulationHeat Flux AnalysisHeat Flux MeasurementHeat Transfer MechanismsInlet DistortionTurbine AerodynamicsTurbulence EffectsTurbulent Flow Heat Transfer
Experiments were carried out to assess the influence of combustor-exit flow nonuniformities on turbine rotor blade heat transfer. Steady radial and circumferential temperature distortions as well as velocity turbulence were introduced at the inlet of a transonic turbine stage and their effects on rotor surface heat flux were investigated. Heat flux was measured along the chord of the rotor blade surface at three spanwise locations representing nominal tip, midspan and hub radii. Inlet turbulence intensity changes from 0.5% to 8% did not change the rotor blade heat flux. Both circumferential and radial temperature distortions increased the rotor pressure surface heat flux significantly, as much as 50%. A three-dimensional, Euler, multi-blade row, CFD code was used to simulate a turbine flowfield using experimental conditions as input, and results were used to help interpret experimental findings. Flow mechanisms contributing to the observed heat flux changes are delineated. 'd'
12
High-frequency response heat-flux gauge
A. H. Epstein, G. R. Guenette, R. J. G. Norton et al. · Review of Scientific Instruments · 1986 · 106 citations
Engineering, Materials Engineering, Mechanical Engineering +17