Industrial & Engineering Chemistry Research · 2011 · 29 citations · 27 references
PharmacyChemical EngineeringPharmaceuticsBiomaterialsDrug DeliveryPolymer ChemistryBiodegradable PolymersDrug FormulationPharmaceutical StabilityPolymeric Drug Delivery SystemsAmorphous State CharacterizationBiodegradable Active FilmsBiodegradable Polymer CarriersDrug - Polymer InteractionsEquilibriumFilm-forming Drug Delivery SystemsPolymer Film PerformancePolymers In Drug Formulation
Supercritical solution impregnation (SSI) was applied to prepare drug-loaded biodegradable films where poly( l -lactic acid) (PLLA) was used as the matrix and roxithromycin as the model drug. The effects of impregnation time, operating temperature, and pressure on drug loading capacity (DLC) of roxithromycin into PLLA matrix were investigated. With the extension of impregnation time, DLC increased gradually to an equilibrium value. DLC was also affected by impregnation temperature and pressure. At the optimal condition, i.e., impregnating at 70 °C and 300 bar for 2 h, the maximal DLC was approximately 10.5%. After SSI process, the PLLA film was still transparent. The SEM images showed that the morphologies of PLLA film did not change with the SSI process. The DSC data and XRD spectra demonstrated that roxithromycin molecules were dispersed into the PLLA film in an amorphous state and the SCCO 2 processed PLLA film had a lower crystal degree than raw PLLA film. The residual dichloromethane due to the PLLA film preparation could be removed effectively during the SSI process and meet the Chinese Pharmacopoeia limit. In vitro release of roxithromycin consisted of two stages: initial rapid release and a following slow release. The SSI process is expected to be a promising technique to prepare a drug-loaded biodegradable polymer surface and matrix for antibacterial therapeutic implants.
27
Foaming of polypropylene with supercritical carbon dioxide
Zhimei Xu, Xiulei Jiang, Tao Liu et al. · The Journal of Supercritical Fluids · 2006 · 295 citations
Natural Sciences, Materials Engineering, Materials Science +12
Rong Liu, Guanghui Ma, Fantao Meng et al. · Journal of Controlled Release · 2004 · 136 citations · Full text