LES Blowout Analysis of Premixed Flow Past V-gutter Flameholder

Clifford E. Smith, D. Nickolaus, Timothy Leach, Barry Kiel, Kyle Garwick

45th AIAA Aerospace Sciences Meeting and Exhibit · 2007 · 36 citations · 10 references

Concepts

Abstract

In this study, we have analyzed premixed propane/air reacting in a duct, with the flame being anchored by a V-gutter flameholder. 3D Large Eddy Simulation (LES) analyses were performed for flow conditions of one atmosphere, 700K, and inlet velocity of 52.1 m/s (Reynolds number of 29,000 based on flameholder height). Three types of analyses were performed: 1) nonreacting flow with nonvitiated air, 2) reacting flow with nonvitiated air at various equivalence ratios leading to blowout, and 3) reacting flow with vitiated air at various equivalence ratios leading to blowout. The predictions were qualitatively compared to experimental measurements of time-averaged mean and rms velocities, Strouhal number, flame images, and lean blowout. Unfortunately, quantitative comparisons could not be made because of differences between flow conditions and geometry (open versus closed V-gutter) of the experiments and calculations. The predictions were able to capture the basic flame structure near blowout of a Kelvin Helmholtz shear layer off the lip of the V-gutter, followed by von Karman structures further downstream. Blowout predictions for reacting flow with nonvitiated air showed reasonable agreement with experimental measurements, although improvements are needed. Analysis of reacting flow with vitiated air showed that blowout occurred at a fuelflow that was 24% more than the nonvitiated case, caused by lower reaction rates for the vitiated case. The basic flame structure was similar for the nonvitiated and vitiated blowout scenarios.

References

10