ACS Applied Materials & Interfaces · 2014 · 128 citations · 50 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologySensorsChemical SensorsMetal Oxide NanomaterialsMetal OxidesNanosensorsNanowiresSensor MaterialsCatalytic ActivityNanomaterial-based SensorsNanowire SensorsOxide NanowiresSchottky BarriersThermal EvaporationZinc Oxide NanostructuresZinc Oxides
Co-doped branched ZnO nanowires were prepared by multistep vapor-phase reactions for the ultraselective and sensitive detection of p-xylene. Highly crystalline ZnO NWs were transformed into CoO NWs by thermal evaporation of CoCl2 powder at 700 °C. The Co-doped ZnO branches were grown subsequently by thermal evaporation of Zn metal powder at 500 °C using CoO NWs as catalyst. The response (resistance ratio) of the Co-doped branched ZnO NW network sensor to 5 ppm p-xylene at 400 °C was 19.55, which was significantly higher than those to 5 ppm toluene, C2H5OH, and other interference gases. The sensitive and selective detection of p-xylene, particularly distinguishing among benzene, toluene, and xylene with lower cross-responses to C2H5OH, can be attributed to the tuned catalytic activity of Co components, which induces preferential dissociation of p-xylene into more active species, as well as the increase of chemiresistive variation due to the abundant formation of Schottky barriers between the branches.
50
Gas sensing properties of defect-controlled ZnO-nanowire gas sensor
Martin Ahn, K.-S. Park, Jeong-Mu Heo et al. · Applied Physics Letters · 2008 · 712 citations
Natural Sciences, Materials Engineering, Materials Science +17