20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference · 2015 · 13 citations · 8 references
EngineeringAerospace EngineeringMechanical EngineeringCombustionHeat TransferPropulsionEngine CoolingEngine DesignEngine PerformanceEngine TestingHypersonic PropulsionTurbojet EnginesEngine Core DesignEngine Performance TestingFlight ConditionsHigh-speed OperationHypersonic Engine PerformanceHypersonic PerformanceLow-speed OperationMach Number
Pre-cooled turbojet engine is investigated to realize Mach 5 class hypersonic transport aircraft. The engine has been demonstrated under sea level static and Mach 2 flight conditions using hydrogen as fuel. In this study, Mach 4 propulsion wind tunnel test is performed and the performance of air intake, pre-cooler, core engine and exhaust nozzle are obtained. Liquid nitrogen is supplied to the pre-cooler as a coolant in place of liquid hydrogen. Gaseous hydrogen is supplied to the main burner to drive the turbine with the combustion gas. A protective screen is placed in front of the pre-cooler to prevent damages of it from high-speed particles. Bypass door is placed in front of the core engine to start the mixed compression air intake at low speed operation of the core engine. As a result, the engine performance data is obtained without any damage of pre-cooler. Air intake is started by the effect of bypass door at low speed operation of the core engine.
8
Design Study on a Small Pre-Cooled Turbojet Engine for Flight Experiments
Hideyuki Taguchi, Tetsuya Sato, Hiroaki Kobayashi et al. · AIAA/CIRA 13th International Space Planes and Hypersonics Systems and Technologies Conference · 2005 · 32 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17
Firing Test of a Hypersonic Turbojet Engine Installed on a Flight Test Vehicle
Hideyuki Taguchi, Kenya Harada, Hiroaki Kobayashi et al. · 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference · 2009 · 25 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17