Energy & Fuels · 2012 · 95 citations · 28 references
Natural SciencesChemical EngineeringMaterials ScienceNanomaterialsPolymer ChemistrySurface ScienceCarbon Dioxide RemovalInorganic NanoparticlesNanoparticle SurfacesNanoparticle SynthesisPolymeric NanomaterialsPolymeric NanoparticlesAbsorbent MaterialsAdsorption-based CaptureNanomaterial-based SorbentsNanoparticle AdsorptionNanoparticlesSilica-based AdsorbentsSilica-based NanoparticlesSilica-based Sorbents
This paper describes the capture of CO 2 by polyethylenimine (PEI) physically adsorbed on the surface of silica nanoparticles. The resulting material proved to be not only regenerable but also having the right qualities needed for a practical utilization, including absorption not only from high concentration streams like flue gases and natural gas wells but also from the air itself. Polyethyleneglycol (PEG) was used as a coadditive. The effect on CO 2 capture of temperature, supports, and concentrations of polyethylenimine and polyethyleneglycol was evaluated. Based on the results, the PEI and PEG concentrations were optimized to obtain a material with optimal CO 2 absorption characteristics. The obtained material demonstrated the practical possibility to capture CO 2 using an inexpensive, easy-to-prepare, and regenerable absorbent.
28
Amine Scrubbing for CO <sub>2</sub> Capture
Gary T. Rochelle · Science · 2009 · 4.3K citations
Engineering, Chemical Engineering, Environmental Engineering +14
An overview of CO2 capture technologies
Niall MacDowell, Nick Florin, Antoine Buchard et al. · Energy & Environmental Science · 2010 · 1.6K citations
Engineering, Chemical Engineering, Environmental Engineering +17