Low-Ripple and High-Precision High-Voltage DC Power Supply for Pulsed Power Applications

Abstract

This paper describes the design and implementation of a three-phase resonant converter with low ripple and high control accuracy. Based on a three-phase LCC-type resonant converter-which has advantages of low ripple, highefficiency, and high-power density compared with a single-phase converter-a high-voltage power supply with low ripple (<;0.1%) was designed. In addition to the general merits of an LCC-type resonant converter operating at continuous conduction mode- including soft switching, low conduction loss, and current source characteristics-the proposed scheme uses only one phase under a light-load condition by having different leg designs of the gate drive circuit and snubber parameters. This allows the design to overcome the operational constraints of the general LCC-type resonant converter. The distinctive design of the three-phase converter structure provides high efficiency and low ripple not only during rated operation, but also under light-load conditions. In order to analyze the high performance of the proposed scheme from no load to rated load, a PSPICE simulation was carried out. Comparison results with a conventional LCC-type resonant converter based on a single-phase structure are analyzed from the viewpoints of output ripple, losses, and operable load range. Using the proposed converter, a 20-kV, 20-kW high-voltage dc power supply design and implementation was presented with a superior gate drive circuit. Finally, the superiority of the proposed converter was verified through a simulation and experimental results. It was experimentally confirmed that the developed power supply achieves high performance in terms of efficiency (98%), operable load range (0.5-20 kV), and low ripple (0.05%), with a high power density.