42nd AIAA Aerospace Sciences Meeting and Exhibit · 2004 · 11 citations · 9 references
EngineeringMaterials EngineeringMaterials ScienceCombustionReaction EngineeringThermal AnalysisAluminum OxidesCombustion FundamentalsCombustion KineticsCombustion ProcessesIgnitionOxidizer EffectsChemical Kinetics Of IgnitionCombustion BehaviorCombustion ChemistryDehydrogenationGas-phase KineticsGas-phase ReactionsOxidizersShock Tube Kinetics
The combustion behavior of aluminum hydride (AlH3) at elevated pressures (8.5 atm) and temperatures (1500-2800 K) in various oxidizers has been investigated using a shock tube. The burn times of AlH3 in O2 and CO2 were measured using emission from AlO and compared with aluminum. Burn times were similar for both materials when heating and dehydrogenation was allowed to occur before being introduced to combustion conditions, as well as for conditions in which there was no heating or dehydrogenation before exposure to the combustion environment. The gas phase temperature from AlO spectroscopy and solid phase temperature from pyrometry were also similar for both aluminum and AlH3. AlH3 ignites at lower temperatures than aluminum. These measurements are consistent with very fast dehydrogenation followed by combustion of the remaining aluminum. Based on these measurements, if aluminum hydride were substituted for aluminum in conventional propellant mixtures, this would lead to the desorbed hydrogen reacting in the propellant flame zone, while the residual aluminum would burn in the post flame gases.
9
Preparation and properties of aluminum hydride
Frank M. Brower, Norman E. Matzek, Paul F. Reigler et al. · Journal of the American Chemical Society · 1976 · 303 citations
Thermodynamic Properties of Aluminum Hydride
G. C. Sinke, Lynn C. Walker, F. L. Oetting et al. · The Journal of Chemical Physics · 1967 · 139 citations
P. Bucher, Richard A. Yetter, Frederick L. Dryer et al. · Symposium (International) on Combustion · 1998 · 108 citations