Journal of Tribology · 2016 · 24 citations · 30 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsSurface EngineeringTribologyDamage MechanicsFracture MechanicsRolling ContactSliding ContactSurface HardeningSurface RoughnessAdhesion CoefficientContact FatigueContact Fatigue ResistanceCracksRolling Contact Damage MechanismsRolling Contact FatigueSurface DamageSurface Pitting
With a subscale rolling-sliding apparatus, the objective of this study is to explore the adhesion and rolling contact fatigue characteristics of wheel/rail rollers with sanding under water condition. Sanding improves adhesion coefficient but aggravates the surface damage of wheel and rail materials. With the particle diameter and feed rate increasing, the adhesion coefficient is further improved. However, the surface damage (spalling and pits) becomes severer as well as the surface roughness. Note that pitting is a special damage type when sanding is used to improve the adhesion. Big pits and fatigue cracks appear on subsurface under larger particle diameter and feed rate conditions. Severe cracks initiate from big pits and develop into material to a depth, which results in bulk material breaking.
30
Wheel/rail adhesion and analysis by using full scale roller rig
Weihua Zhang, Xuejie Wu, Xuesong Jin · Wear · 2002 · 212 citations
Twin disc assessment of wheel/rail adhesion
Ezequiel Alberto Gallardo-Hernández, Roger Lewis · Wear · 2008 · 190 citations
Rolling–sliding laboratory tests of friction modifiers in dry and wet wheel–rail contacts
Oscar Arias-Cuevas, Zili Li, Roger Lewis et al. · Wear · 2009 · 115 citations
Squat growth—Some observations and the validation of numerical predictions
Zili Li, Rolf Dollevoet, Marija Molodova et al. · Wear · 2010 · 114 citations