Journal of Biotechnology · 2016 · 42 citations · 23 references
Natural SciencesBiotechnologyEnvironmental EngineeringMarine BiotechnologyPhycologyWater TreatmentMarine Bioprocess EngineeringOcean SalinityBiomass RecoveryChitosanChitosan-based PolymersMicrobial Biomass Under SalinityPolymer FlocculantsPolymer Persistence LengthViscosityZeta Potential Measurement
A mechanistic study was performed to evaluate the effect of salinity on cationic polymeric flocculants, that are used for the harvesting of microalgae. The polyacrylamide Synthofloc 5080H and the polysaccharide Chitosan were employed for the flocculation of Neochloris oleoabundans. In seawater conditions, a maximum biomass recovery of 66% was obtained with a dosage of 90mg/L Chitosan. This recovery was approximately 25% lower compared to Synthofloc 5080H reaching recoveries greater than 90% with dosages of 30mg/L. Although different recoveries were obtained with both flocculants, the polymers exhibit a similar apparent polymer length, as was evaluated from viscosity measurements. While both flocculants exhibit similar polymer lengths in increasing salinity, the zeta potential differs. This indicates that polymeric charge dominates flocculation. With increased salinity, the effectivity of cationic polymeric flocculants decreases due to a reduction in cationic charge. This mechanism was confirmed through a SEM analysis and additional experiments using flocculants with various charge densities.
23
Flocculation of microalgae using cationic starch
Dries Vandamme, Imogen Foubert, Boudewijn Meesschaert et al. · Journal of Applied Phycology · 2009 · 341 citations · Full text
Harvesting microalgae by flocculation–sedimentation
Tawan Chatsungnoen, Yusuf Chisti · Algal Research · 2015 · 196 citations