Miniaturization of Microstrip Antenna Using the folded Structure

Heo Hee-Moo, Jang Yon-Jeong, Jong‐Myung Woo

The Journal of Korean Institute of Electromagnetic Engineering and Science · 2005 · 10 citations · 0 references

Concepts

Abstract

In this paper, the miniaturized the linear polarization and the circular polarization microstrip antennas, which are the two ends in the resonance length direction or all the four-ends were folded are designed and fabricated at the resonant frequency of 1.575 GHz(fur GPS system). For the linear polarization microstrip antenna, the antenna was bent. downward so that the visible length(=L) was reduced by . The folded antenna was folded toward the center of the antenna once again. In this case, the visible length reduction rate, gain, -10 dB bandwidth, E-plane and H-plane HPBW were , 5.12 dBd, , respectively. For the circular polarization microstrip antenna, the folded structure of the linear polarization antenna was applied to all the few directions. For the most efficiency the folded bottom surfaces were designed in a triangular shape. In this case, the visible area reduction rate, gain, -10 dB bandwidth, and HPBW in horizontal polarization of the z-x plane and the z-y plane were , respectively. Therefore, we have confirmed that the folded structure is suitable fer the miniaturization of the microstrip antenna.