Palladium-Rhodium Catalyst Strategies for LEV Emission Applications

W. B. Williamson, Gregory Denison, G. L. Starin, Heinz J. Robota

SAE technical papers on CD-ROM/SAE technical paper series · 1997 · 10 citations · 32 references

Concepts

Abstract

<div class="htmlview paragraph">Palladium-rhodium three-way catalysts (Pd/Rh TWCs) demonstrate the most versatile capability in achieving California LEV/ULEV emission standards for various applications ranging from thermally severe high-temperature close-coupled locations to thermally limited cooler underfloor environments. Engine aged dual-brick converters consisting of front Pd catalysts followed by rear Pd/Rh TWCs met ULEV emission standards for a high-temperature close-coupled 4.3L medium-duty truck and LEV standards for a much cooler underfloor 3. IL passenger car location, as well as intermediate environments experienced by a 3.8L vehicle. The Pd + Pd/Rh TWC systems have performance advantages and are more cost effective compared to Pd-only or trimetal (Pt/Pd/Rh) systems. For thermally limited systems such as the 3. IL system, addition of air to the Pd + Pd/Rh system was necessary. Advanced washcoat technologies incorporating stabilized ceria-zirconia promoters demonstrated advantages over earlier generations and alleviate thermal durability concerns of close coupled applications. As a result, passive catalyst only systems can achieve these low emission requirements when sufficient heat is available.</div>

References

32