Langmuir · 2015 · 27 citations · 25 references
EngineeringMaterials EngineeringMaterials ScienceInterface ScienceSurface ScienceTribologyContact AngleLubricant PropertiesLubricant RheologyLubrication EngineeringTribological MaterialsViscous FlowFrictionIonic LiquidsLubricating MaterialsLubricationLubrication In Shear-thinning FluidsLubrication MechanismsTetrafluoroborate SaltsTribology Of Interfaces
To evaluate the friction properties of new lubrication systems, two types of ammonium-based ionic liquids (ILs), N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium tetrafluoroborate ([DEME][BF4]) and N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium bis(trifluoromethanesulfonyl) imide ([DEME][TFSI]), were investigated by resonance shear measurements (RSM) and reciprocating type tribotests between silica (glass) surfaces. RSM revealed that an IL layer of ca. 2 nm in thickness was maintained between the silica surfaces under an applied load of 0.40 mN ∼ 1.2 mN. The relative intensity of the RMS signal indicated that the friction of the system was lower for [DEME][BF4], 0.12, than that of [DEME][TFSI], 0.18. On the other hand, the friction coefficients μk obtained from the tribotests of [DEME][BF4] were lower than that of [DEME][TFSI] for sliding velocities in the range of 5.0 × 10(-4) m s(-1) to 3.0 × 10(-2) m s(-1) under applied loads of 196-980 mN. The friction coefficients obtained by the tribotest are discussed with reference to the RSM results.
25
Room-temperature ionic liquids: a novel versatile lubricant.
Chengfeng Ye, Weimin Liu, Yunxia Chen et al. · Chemical Communications · 2001 · 1K citations