Spark Plasma Sintered Si<sub>3</sub>N<sub>4</sub>/TiN Nanocomposites Obtained by a Colloidal Processing Route

Luis A. Díaz, W. Solís, Pavel Peretyagin, Adolfo Fernández, M. P. Morales, Carlos Pecharromán, J.S. Moya, Ramón Torrecillas

Journal of Nanomaterials · 2016 · 15 citations · 26 references

DOIFull text

Open access

Concepts

Abstract

Ceramic Si 3 N 4 /TiN (22 vol%) nanocomposites have been obtained by Spark Plasma Sintering (SPS). Our colloidal processing route allows obtaining dispersed nanoparticles of TiN smaller than 50 nm avoiding the presence of agglomerates. The nanostructured starting powders were obtained by using a colloidal method where commercial Si 3 N 4 submicrometer particles were coated with anatase TiO 2 nanocrystals. A later nitridation process led to the formation of TiN nanoparticles on the surface of Si 3 N 4 . A second set of powders was prepared by doping the above defined powders with yttrium and aluminium precursors using also a colloidal method as sources of alumina and yttria. After thermal nitridation and SPS treatment, it has been found that the addition of oxides dopants improves the mechanical performance (<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mrow><mml:msub><mml:mrow><mml:mi>K</mml:mi></mml:mrow><mml:mrow><mml:mi mathvariant="normal">I</mml:mi><mml:mi mathvariant="normal">C</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math>,<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M2"><mml:mrow><mml:msub><mml:mrow><mml:mi>σ</mml:mi></mml:mrow><mml:mrow><mml:mi>f</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math>) but increases the electrical resistivity and significantly reduces the hardness. This is due to the formation of a continuous insulating glassy phase that totally envelops the conductive TiN nanoparticles, avoiding the percolative contact between them. The combination of colloidal processing route and SPS allows the designing of tailor-made free glassy phase Si 3 N 4 /TiN nanocomposites with controlled microstructure. The microstructural features and the thermoelectrical and mechanical properties of both kinds of dense SPSed compacts are discussed in this work.

References

26