Effect of MWCNTs-COOH Reinforcement on Tribological Behaviors of PI/MWCNTs-COOH Nanocomposites Under Seawater Lubrication

Peng Nie, Chunying Min, Xihui Chen, Chen Shen, Wenjun Tu, Haojie Song

Tribology Transactions · 2015 · 16 citations · 28 references

Concepts

Abstract

The carboxyl-functionalized multiwalled carbon nanotube (MWCNT-COOH) was achieved by grafting carboxyl (COOH) groups onto surfaces of MWCNTs. Then polyimide (PI)-based nanocomposites reinforced with MWCNTs-COOH and MWCNTs were prepared by in situ polymerization and the tribological behaviors of PI/MWCNTs-COOH and PI/MWCNT nanocomposites were studied under dry friction and seawater lubrication. The results showed that the incorporation of MWCNTs-COOH and MWCNTs could greatly improve the wear resistance of PI because of the lubricating effect of MWCNTs-COOH and MWCNTs. In additon, the PI/MWCNTs-COOH exhibited better tribological performance than the PI/MWCNTs under dry friction due to functionalization of MWCNTs. In addition, PI/MWCNTs-COOH nanocomposites presented better tribological properties under seawater lubrication than other conditions because of the excellent lubricating effect of seawater, especially when the content of MWCNTs-COOH was 0.7 wt%. Furthermore, the effects of applied load and sliding speed on the tribological behaviors of PI/MWCNTs-COOH nanocomposites were studied under seawater lubrication. It was found that 0.7 wt% PI/MWCNTs-COOH nanocomposites had the best friction reduction and antiwear properties when the applied load and sliding speed were 3 N and 0.26 m/s, respectively, under seawater lubrication.

References

28