MECHANICAL PROPERTIES OF HIGH PERFORMANCE CONCRETE INCORPORATING GRANITE POWDER AS FINE AGGREGATE

Kanmalai Williams .C, Pachaivannan Partheeban, Felix Kala T.

International Journal on Design and Manufacturing Technologies · 2008 · 44 citations · 7 references

DOIFull text

Open access

Concepts

Abstract

This paper reports the results of an experimental study on the high performance concrete made with granite powder as fine aggregate. The percentage of granite powder added by weight a range viz. 0, 25, 50, 75 and 100% as a replacement of sand used in concrete and cement was replaced with 7.5 % Silica fume, 10% fly ash, 10% slag and 1% superplasticiser. The effects o of curing temperature at 32 C and 0.40 water-to-binder (w/b) ratio for 1, 7, 14, 28, 56 and 90 days on compressive strength, split tensile strength, modulus of elasticity, drying shrinkage and water penetration of concrete were studied. Experimental results indicate that the increase in the proportions of granite powder resulted in a decrease in the compressive strength of concrete. The highest compressive strength was achieved in samples containing 25% granite powder concrete, which was 47.35 kPa after 90 days. The overall test performance revealed that granite powder can be utilized as a partial replacement of natural sand in high performance concrete.

References

7