OhioLink ETD Center (Ohio Library and Information Network) · 2012 · 10 citations · 0 references
Open access
EngineeringAutomotive EngineeringMechanical EngineeringHybrid Vehicle SystemsPowertrain EngineeringVehicle TestingEngine LubricationEngine Performance CharacteristicsLubricant PropertiesLubricant RheologyLubrication EngineeringLubrication SystemsChassis Dynamometer TestingLubricant Viscosity EffectsLubricantsMaximum GainPlug-in Hybrid Electric PowertrainsPlug-in Hybrid Electric VehiclesPlug-in Hybrid PowertrainsTransmission Lubrication
With the lubricants operating at different steady state temperature in HEV, EV, and PHEV the optimum oil viscosity for the best vehicle efficiency would differ for every driving mode.The importance of engine and transmission lubricants viscosity on the efficiency of a vehicle in EV, HEV, and PHEV mode was studied in this work..A Toyota Prius modified for plug-in hybrid operation was used to perform experiments on the chassis dynamometer facility at The Ohio State University.Three different engine and three different transmission lubricants were used in the experiments.Sensors were installed into the vehicle to log the desired data signals using data loggers.Experiments revealed that the lubricants operating temperature was significantly lesser in EV mode as compared to HEV and PHEV mode.A gain of 17% in vehicle efficiency was obtained using a less viscous transmission oil in EV mode over the factory oils.The impact of engine lubricant on vehicle efficiency was higher in HEV mode than PHEV mode.A maximum gain of 11% and 10% was achieved in PHEV and HEV mode respectively with the less viscous transmission oil.Engine oil with typical formulation resulted in slightly better vehicle efficiency than the oil with the with a different friction modifier in both HEV and PHEV modes.An error analysis at a 95% confidence level was done to evaluate error in experiments results.