SAE technical papers on CD-ROM/SAE technical paper series · 1989 · 51 citations · 7 references
EngineeringAutomotive EngineeringMechanical EngineeringCombustionComputational Fluid DynamicsFluid DynamicsEngine ModelingEngine PerformanceIgnitionSpark-ignition EnginesTurbulenceTurbulent FlowCombustion DynamicsEngine Combustion ModelingExhaust Gas Flow DynamicsIgnition ModelingSpark Ignition Engine PerformanceSpark-ignition Engine ModelingTurbulence Effects
<div class="htmlview paragraph">A study based on both three dimensional modelling of the internal flow and velocity measurements using Laser Doppler Velocimetry in a four-valve spark ignition engine was carried out. Two different optical arrangements, allowing three velocity component measurements, were used.</div> <div class="htmlview paragraph">The intake and the compression strokes were computed and comparisons between computations and experiments were performed for three intake configurations. In configuration for which two intake valves are opened, specific computational difficulties arise and no satisfactory agreement is achieved. However, when only one intake valve is opened, the computed and measured velocity profiles are found to agree relatively well.</div> <div class="htmlview paragraph">In the basic configuration, the internal flow is characterized by a tumbling motion. The combination with swirl in the two other configurations leads to the generation of complex flow structures which can be described as inclined tumble. One of the main features of these flows is an amplification of turbulence when the piston approaches Top Dead Center, which results in favorable conditions for the initiation of combustion.</div>
7