Science and Technology of Welding & Joining · 2016 · 18 citations · 27 references
EngineeringMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetallurgyResidual StressResidual Stress In JointsWeldingWelding ProcessesDesign ConstraintsFriction WeldingLinear Friction WeldingResidual Stress In Welded JointsResidual Stresses In WeldsWeld-induced Residual StressWelding Residual StressX-ray Diffraction Analysis
The Ti–5Al–2Sn–2Zr–4Mo–4Cr (Ti17) titanium alloy is the main material used in manufacturing blades and disks of aero engines, and it is always jointed with different microstructures for the design constraints. In this work, the residual stresses of linear friction welding of β Ti17 and α + β Ti17 are measured by contour method and the X-ray diffraction method. The welding-induced tensions were found to be greater on the β side than that on the α + β side, and had an obvious reduction in the weld centre. After the post weld heat treatment (PWHT) of 630°C for 3 h, all tensions on the β side relax to a very limited value while some new PWHT-induced compressions are found on the α + β side.
27
Methods of measuring residual stresses in components
N.S. Rossini, Michele Dassisti, K.Y. Benyounis et al. · Materials & Design (1980-2015) · 2011 · 903 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +12
High frequency linear friction welding of a titanium alloy
Achilles Vairis, M. Frost · Wear · 1998 · 270 citations
Natural Sciences, Materials Engineering, Materials Science +14