Load Transfer for Axially Loaded Piles in Clay

H M Coyle, Lymon C. Reese

Journal of the Soil Mechanics and Foundations Division · 1966 · 481 citations · 0 references

Concepts

TL;DR

The study presents an analytical method for generating a theoretical load‑settlement curve for axially loaded piles in clay. The method correlates the ratio of load transfer to soil shear strength with pile movement, using field and laboratory data to produce a family of depth‑dependent curves that are validated by comparing computed and measured load‑settlement responses. The approach is validated by matching computed and observed load‑settlement curves and demonstrates that it can effectively predict the load‑carrying capacity of axially loaded piles in clay.

Abstract

An analytical method for developing a theoretical load-settlement curve for axially loaded piles in clay is presented. The method is based on the correlation of the ratio of load transfer to soil shear strength as a function of pile movement. The results of studies of field tests of instrumented piles and laboratory tests of small piles in clay are used to obtain the desired correlation. The correlation is presented in the form of a family of curves that are obtained when the ratios of load transfer to soil shear strength versus pile movement are plotted as a function of depth. The validity of the family of correlation curves is checked by comparing computed and actual load-settlement curves for some typical field tests. Results obtained by this method indicate that the method may be used effectively to determine load-carrying capacity for axially loaded piles in clay.