Potential of Additional Mechanical Supercharging for Commercial Vehicle Engines

Thomas N. Schmitz, Klaus-D. Holloh, Rolf Juergens, Guenter Fleckenstein

SAE technical papers on CD-ROM/SAE technical paper series · 1994 · 11 citations · 0 references

Concepts

Abstract

<div class="htmlview paragraph">Modern commercial vehicle engines are equipped with turbocharging and intercooling. This results in low emissions and fuel consumption. In the lower speed and load range and under transient conditions, these engines have disadvantages, as the fuel injection rate has to be limited to avoid excessive smoke emission.</div> <div class="htmlview paragraph">Also, the engine braking performance of highly charged, small displacement engines is also lower than that of large displacement engines.</div> <div class="htmlview paragraph">Mercedes-Benz decided to develop a combination of turbocharger and mechanical supercharger.</div> <div class="htmlview paragraph">In the lower speed range higher torque levels are possible and maximum torque is available without any lag especially in the transient mode with low smoke emission and fuel consumption.</div> <div class="htmlview paragraph">Vehicle performance during acceleration can be improved by up to 30%.</div> <div class="htmlview paragraph">During engine braking operation, the mechanical supercharger is activated throughout the whole engine speed range which results in a distinctive increase in braking power.</div> <div class="htmlview paragraph">Possible vehicle performance with and without additional Supercharging is discussed under fired and braking operation.</div>